|
|
Workplace safety standards
Workplace safety standards listed below represent a selection of programs, equipment, procedures and reports that would commonly apply across many occupations. The grouping is not oriented especially to the manufacture or testing of products used to protect workers. Instead these standards apply to the worker and the employer making responsible decisions for their own safety and that of their coworkers.
In addition to searches by keyword or document number, you may want to check pages for
laboratory safety,
confined spaces,
construction safety or others where specific standards are listed for those occupations.
People everywhere are concerned about safety so ANSI offers a wide range of international standards from the US,
UK,
Canada,
Brazil,
Germany,
Australia,
Japan and around the world.
Workplace Safety General Guidelines
 |
NFPA 70E-2012
Standard for Electrical Safety in the Workplace, 2012 Edition
ANSI/ASSE A10.38-2000 (R2007)
Basic Elements of an Employer's Program to Provide a Safe and Healthful Work Environment
CSA Z462-12
Workplace electrical safety
ANSI Z400.1/Z129.1-2010
Hazardous Workplace Chemicals - Hazard Evaluation and Safety Data Sheet and Precautionary Labeling Preparation
ISO 18893:2004
Mobile elevating work platforms - Safety principles, inspection, maintenance and operation
ISO 20712-1:2008
Water safety signs and beach safety flags - Part 1: Specifications for water safety signs used in workplaces and public areas
ANSI/ASSE A1264
Safety for Workplace Surfaces Package ANSI/ASSE A1264. Safety for Workplace Surfaces Package
|
Workplace Safety Personal Protective Equipment
 |
BS 7184:2001
Selection, use and maintenance of chemical protective clothing. Guidance
BS 7971-1:2002
Protective clothing and equipment for use in violent situations and in training. General requirements
ISO 13688:1998
Protective clothing - General requirements
BS EN 529:2005
Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document
ANSI/ISEA 107-2010
American National Standard for High Visibility Safety Apparel and Headwear Devices
CSA Z96.1-08
Guideline on Selection, Use, and Care of High-Visibility Safety Apparel
CSA Z96-09
High-visibility safety apparel
BS EN 175:1997
Personal protection. Equipment for eye and face protection during welding and allied processes
|
Workplace Safety Procedures
 |
ASTM F1011-07
Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
NEMA MG 2-2001 Rev 1-2007
Safety standard and guide for selection, installation, and use of electrical motors and generators
ANSI/AIHA Z9.3-2007
Spray Finishing Operations: Safety Code for Design, Construction, and Ventilation
ANSI/ASSE A10.16-2009
Package Safety Requirements for Tunnels, Shafts, and Caissons American National Standard for Construction and Demolition Operations with Comparision document for versions 1995 and 2009
ANSI/ASSE A10.47-2009
Work Zone Safety for Highway Construction American National Standard for Construction and Demolition Operations
AWS C4.2-C4.2M-2009
Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation
AWS c4.3-c4.3m-2004 AWS C4.3/C4.3M
RECOMMENDED PRACTICES FOR SAFE AND OXYFUEL GAS HEATING TORCH OPERATION
ANSI Z245.2-2008
Stationary Compactors -- Safety Requirements for Installation, Maintenance, and Operation
ANSI Z245.30-2008
Equipment Technology and Operations for Wastes and Recyclable Materials - Waste Containers - Safety Requirements
ANSI Z245.5-2008
Baling Equipment -- Safety Requirements for Installation, Maintenance, and Operation
CSA Z142-10
Code for power press operation: Health, safety, and safeguarding requirements
CSA Z275.2-11
Occupational safety code for diving operations
1127-1998
Guide for the Design, Construction, and Operation of Safe and Reliable Substations for Environmental Acceptance
902-1998
IEEE Guide for Maintenance, Operation and Safety of Industrial and Commercial Power Systems (Yellow Book)
ANSI/IEEE C95.4-2002
Recommended Practice for Determining Safe Distances from Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive Operations
IEC/TS 61149 Ed. 1.0 b:1995
Guide for safe handling and operation of mobile radio equipment
ASTM E2349-12
Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
NFPA 3-2012
Recommended Practice on Commissioning and Integrated Testing of Fire Protection and Life Safety Systems, 2012 Edition
ANSI/ISA-RP12.13.02-2003 (IEC 61779-6 Mod)
Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments
ANSI/ISA TR12.13.03-2009
Guide for Combustible Gas Detection as a Method of Protection
AS 4655-2005
Fire safety audits (FOREIGN STANDARD)
ASTM D7316-06
Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions
ASTM E2601-08
Standard Practice for Radiological Emergency Response
|
Workplace Safety Reports
 |
AS 1885.1-1990
Measurement of occupational health and safety performance - Describing and reporting occupational injuries and disease (known as the National Standard for workplace injury and disease recording) (FOREIGN STANDARD)
ASTM F1694-09
Standard Guide for Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
|
|
|
